- Can I use old concrete as fill for new concrete?
- Will quikrete bond to concrete?
- How long does concrete rebar last?
- Is gravel necessary under concrete?
- Why do they put foam under concrete?
- Does new concrete stick to old?
- What happens to soil under concrete?
- Can you bury concrete deck blocks?
- How do you prepare ground for concrete?
- Can I pour concrete over old concrete?
- Is it OK to bury concrete?
- Is quikrete as strong as regular concrete?
- Can I pour concrete over two days?
- What is concrete overlay?
- Can you bond epoxy to concrete?
- What can you do with chunks of concrete?
- Can I bury rubble?
- How long does it take for concrete bonding adhesive to dry?
- What is the best glue for concrete?
- Does Waste Management take concrete?
- How do you reuse hardened concrete?
- Does crushed concrete make a good driveway?
Can I use old concrete as fill for new concrete?
Old, unneeded concrete can be recycled and used to create recycled aggregate.
In most cases, recycled aggregate will be used as a subbase material, but it can also be paired with virgin materials and reused as an aggregate in new concrete..
Will quikrete bond to concrete?
QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.
How long does concrete rebar last?
50-100 yearsIn reality, their life span is more like 50-100 years, and sometimes less.
Is gravel necessary under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
Why do they put foam under concrete?
Concrete contractors learned that a layer of poly helps to keep a slab dry, because it stops upward vapor diffusion from the soil. … The foam layer isolates the room-temperature slab from the cold soil under the slab.
Does new concrete stick to old?
Fact: Fresh wet concrete does not normally bond well to existing dry concrete. … Concrete would have gotten an F. There is nothing in basic portland cement that will act as a bonding agent. Portland cement concrete works well in mass and provides great compressive strength but not bond.
What happens to soil under concrete?
The issues that arise with soil under large areas of concrete include compaction, hydrophobic soil, lack of organic material and pH. … Organic materials (compost and manure) need to be dug into the soil. This will help break up the compacted soil, increasing the pore space and improve the overall structure.
Can you bury concrete deck blocks?
Simply placing them on the ground or on a poured concrete pad a few inches deep usually isn’t enough to comply with codes — they must be set at least 12 inches deep in undisturbed soil. However, concrete deck blocks can be used without restriction for a freestanding deck that’s not attached to your house.
How do you prepare ground for concrete?
Preparation is the most important aspect of pouring a concrete slab.Dig the ground down to the proper depth. … Smooth out the ground with the flat side of a rake so that you have a level surface. … Tamp the ground with a hand tamper or mechanical tamper. … Pour 2 inches of small, rounded gravel for additional drainage needs.
Can I pour concrete over old concrete?
Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies. … You should improve the drainage of the slab by having a good slope on the overlay.
Is it OK to bury concrete?
Burying concrete is only a temporary solution. If you want to grow something in that spot in the future, you might have to dig the concrete back up again and dispose of it in a different way. … Concrete should not be buried where flowers and other plants are going to be grown.
Is quikrete as strong as regular concrete?
Quikrete Fast-Setting Concrete Mix is easy to use — just add water — and it sets in 20 to 40 minutes. It’s the most efficient option for setting posts for things like mailboxes, fences and lamps. … That’s stronger than the concrete used for foundations on most homes.
Can I pour concrete over two days?
How long you have until you must take into account other considerations for concrete to self-bond; about two hours maximum. After that, it’s way beyond ‘begun’ to set. Your previous pour should have left some rebar sticking out, if you knew it was going to take multiple days pours.
What is concrete overlay?
What is a Concrete Overlay? Answer: A concrete overlay is a thin color concrete cement based products that go over existing concrete for repair or decorative reasons. Overlays can be applied as thin as a feather finish up to in most cases 3/4″ depending on the desired finish.
Can you bond epoxy to concrete?
Today it is possible to bond any material, including concrete itself, firmly and permanently to a hardened concrete surface. Such bonding, using epoxy based “glues”, becomes as strong, and frequently stronger, than can be achieved by any mechanical means of connection.
What can you do with chunks of concrete?
How to Dispose of ConcreteRent a Roll Off Dumpster. This is a quick and affordable way to dispose of concrete, asphalt and other heavy construction debris, such as bricks. … Leave a ‘Free’ Sign Out. … Dump It Yourself. … Take It to a Concrete or Landscape Supplier. … Use It in Your Own Landscaping. … Create a Retaining Wall or Privacy Fence.
Can I bury rubble?
The first thing about rubble is this: it’s a whole lot easier to bury it than dig it back up. You can’t help but mix it in with the soil. And it’s impossible to get every last bit out. For years hence you’ll be uncovering shiny pieces of white tile with your rake in the garden.
How long does it take for concrete bonding adhesive to dry?
three weeksIf you need industrial-strength repair, you can perform a “slurry coat” application by mixing the concrete bonding adhesive with Portland cement, which will result in bond strength of 1300 psi. However, this will take three weeks to fully cure and dry.
What is the best glue for concrete?
SAKRETE Concrete GlueSAKRETE Concrete Glue is a liquid latex bonding adhesive for bonding new concrete, mortar or gypsum plaster to existing surfaces. Ready to use and easy to apply, it eliminates the need for roughing or scoring old surfaces.
Does Waste Management take concrete?
Items accepted include non-hazardous materials such as cardboard, drywall, flooring, roofing materials, tile and windows. WM will continue to offer reduced rates for source-separated materials such as dirt, concrete, asphalt and wood/green waste.
How do you reuse hardened concrete?
Hardened cement or concrete in a sack cannot be used for its original purpose, but there are several ways to salvage the material for new projects….How do you soften hard cement?Remove all loose concrete. … Spray the concrete with highly pressurized cold water.Spray with softening agent.Remove the softened concrete.
Does crushed concrete make a good driveway?
Crushed Concrete driveways are a much more cost-effective driveway solution compared to gravel driveways, regular concrete driveways, or asphalt driveways. With benefits like the price, sustainability, and the fact that it can never crack and require a repair, crushed concrete is a great driveway option.